Him--

Here are the sprayers once they're put together inside.

You could see the tubes in the picture above without sprayers. We had one cap on the end of the large tube. We drilled holes evenly spaced on the 1/2" tubing to put the sprayers in. The sprayers are threaded. You can drill the right size hole for them just like you would drill a hole for a screw. Take the sprayer, choose a bit, put the bit in front of the threads on the sprayer. You want to be able to see the threads around the edge of the screw but not to see the center where the threads come off.

Try starting with a smaller bit and then enlarging carefully until the sprayers fit right.

I would have a picture, but something happened to it and I don't seem to. I'm not quite sure why.

Once the sprayers are on the tube and the tube is in we added the second cap, closing it up.

Attached Thumbnails