View Single Post
Old 02-24-2001, 05:00 AM   #20
robyoung
Seedling
 
Join Date: Jan 2001
Posts: 163
Thanks: 0
Thanked 0 Times in 0 Posts
robyoung is beginning to sprout.

I've never grown to completion in the saucers, actually, this is the first time I have ever done it this way at all.

It was just the easiest way to get them to where they are.
Considering as I keep tellin ya, I don't really live here, and it's all quite temporary.

If you're going to use different lights for each stage of growing, you really wouldn't benifit using son t agros I imagine.
Sounds like you have it all sorted out pretty well huh.

I spent a bloody fortune buying grow tubes of every brand and spectrum you can imagine after spending a monsterous amount of time researching the whole light spectum afair.
That was about 7 years ago.

These days, I buy standard white tubes from Wollies, and they do a better job than all the fancy fluoros I had.

I'm still unsure what to flower these buggers in.
I have a flood and drain table, and I have a 4 outlet air pump.

Descisions descions.....

Probably throw a coin in the air.

I am just using a 400 son t, in a lttle tent of panda film I siliconed to the roof of a tin shed I have in the back yard of this house I'm renting.

Actaully, it came up fairly well.
I glued peices of 2x1 strips of timber 1200mm long in a square on the roof, and then stapled the panda film to that.
I stapled the corners together, and left one corner open to get in and out.

pretty ruf, but it'll do for a couple months.

Take care mate.

rob
__________________
...and if I were a good man
I'd understand the spaces
between friends...
robyoung is offline   Reply With Quote