So, 600W HPS is better than 1000W hps in the following set-up | |
So, are you suggesting that (4) 600W HPS on rail light movers, (1) light over each 4' x 8' area, each light offering some supplemental lighting to each of the other areas with the assistance of mylar reflection enclosing the area in about a 14' x 18' area is better than using (4) 1000W lamps in the same configuration? I'll be burning 2400W for 12 hours instead of 4000W. I see the watt consumption advantage, but am I maximizing intensity for all my plants? When using rail light movers, some plants (the ones at the far ends usually) are exposed to less levels of light than most as the light moves. At the furthest point, the light would be approximately 7 feet away from the end plant. With this in mind, would 1000W be the better or will 600W still be the most efficient? How many lumens would reach the end plants with each lamp type? I know I am probably beating a dead horse but I want to be absolutely sure before making a large light investment. I already own (1) 1000W and (2) 400W. I look forward to any replies. Thanks. |