Them

Welcome vpur.

Thank you for your comment and your concern. I've used H2O2 in the past with great success. I am how ever, not exactly sure what the correct amount would be for seven gallons. If any one knows feel free to shair your information here.

I tried to post pics but I'M STUPID OK.... Can someone help me with that?

Good to here from you vpur. I hope you stay for the show.

scrub

There is a thread on this but I could not find it with searching "How to post a picture." So I made you one.

Attached Thumbnails

 

__________________

Thank you GardensCure community!
Journal Building the Cabinet Training Details Building a Dryer

Them

Thanks scrub but can you now tell me how to get to this page. You know how bad I am with computers. And I'm going to feel so dumb cos it's probably simple. I'll keep truing to figure it out.

Never mind I found it but it doesn't seen to upload my pics. I'll keep trying.

Them

I started thinking I would re-hang my lights. So I attached a 1" dowel to the rafters in the grow room and hung the lights from that. In the process of plugging and unplugging the lights, the MH bulb went out. I was lucky enough to have another 400W MH bulb and a 1000W bulb I didn't know I had. I also found another 400W HPS, so I'm good to go on bulbs for a while.

In the process of re-hanging the bulbs, I rearranged the room and created more space. So I thought this would be a good time to hang the Flo. grow light for the sprouts/clones so I did that as well.

I have a tub from wally world. It is about 2.5' long and 18" wide and 6" deep. I have 21 grow sites in the lid. This might be too many. They may be too close together for the humidity domes to fit between the grow sites. I'll check it out, adjust my THC level , and get back to ya.

scrub

Perhaps the pictures are too large. Check the size maximum for the type of picture (JPG) that you are uploading. Size limits appear at the bottom of the Manage Attachments page. You can see it in the picture I posted. Look for the Attachments Key. Then open your picture in Adobe PhotoShop or similar and resize to fit the requirement.

__________________

Thank you GardensCure community!
Journal Building the Cabinet Training Details Building a Dryer

Them

The clone bubbler is ready to go. I have just enough room for a two liter coke bottle between grow sites. This is what I'll use for a humidity dome. The coke bottles will be cut in half. Each plant gets its own dome. This way I can remove or replace a dome any time I need to.

I will start germinating seeds tonight! If the plant I have now goes south on me I'll have a jump start on the next grow.

dgafdgaf

have you guys seen the atomix aeroponic system.

dgafdgaf

costs like $5 a month to run.

Them

Welcome dgafdgaf. I have not seen this unit.

After another cold night the water temp is 62.

PPM is 600.

Ph is 6.3

I ran both lights last night to keep the grow room worm.

My plant is wilting and seems to have stopped growing again. I looked in the nursery but found nothing on this subject. So I started a thread on it.

Does any one know what the problem is???

Them

I found a 15 min timer. I hope that will make a difference.

The plants don't look good this morning. I'm turning the lights out just to see what happens. I'm getting discouraged on this grow. This will be the first failure I've had.

I have beans cracking in a bowl of water which is on a worming plate.

Upped the PPM to 800.

Lowered the Ph to 5.5

Water temp is 67.

If the plants aren't taking off by the time the beans are ready, I'll start a new grow.