lovestoride

What do I need to do?

cweed

i kept 2 windows open, pm messager and ucer control panel option. i used the pm message text and vb code to set up my sig, using copy/ paste, i then inserted the text into my signature. i hope this is helpfull!

__________________
cbudshots»»grõ~1: grimm white widow

lovestoride

Thanks Cweed,ill try that

Fgid1

Me no get it?I read the FAQ & this but I still dont understand

Fgid1

Never mind...I got it.

Fgid1

Now Im just playin w/ stuff
Pressin buttons & what not
Ive never seen a tomato this color fonts

lovestoride

Hey fgid,yeah it's not easy to figure out if you've never done it. here goes.Open up marijuana.com and go to the discussion boards..find one of your posts and hit pm like your going to pm yourself.Next in the little bar above the message text push the http button and clear out the http:in the box that appears in the upper left.Now you can name your link! Next reduce this window and pull up the first page of your grow and cut by left clicking and highlighting the address bar at the top and right click on it after it's highlighted and hit cut.Reduce this window and paste that address into the pm box at the top.Again cut this address from the pm box at the top and paste it into your sig. in edit profile.Whew good luck

lovestoride

Gol darn ya sure are!!!! <<back from never never land

Fgid1

Thanks anyway lovestoride.
I didnt do it that way though.
I used the [url] tag method I found in the FAQ.Its easier than the way you & cweed did it,to me anyway.Go to FAQ,the part about special tags & codes,click on the [url] tag at the end of that section,something like 'more on vB code' (its underlined like a [url] tag in a sig.).Its all there,I just been missin it.