HOW to make HONEY oil(hash oil)

toke'a'bowl · 10-09-2007, 05:02 PM

i will proceed to tell you how to make some fine quailty honeyoil. near 99%thc. yes it is the bomb.

first off go down to the local hardwear store and get yourself some metal piping, about 1'-2'(feet), two caps for the piping. apower drill and a metal grade drill bit about 1/16" two 8oz cans of butane lighterfluid, coffee filters, a pyrex cake pan.

now take all of your trim from your harvest. you can freeze it right after you trim to keep the potency, you can use anything leaves stems bud w/e you want off the plant...not roots... ok now we got a start. take the caps and drill one hole in the first and about 5 in the second. put the bottom one with 5 holes on now. then take 2 coffe filters and place them in the bottom of the pipe.now fill the tube with your trim. not too tight but fill it. now you will screw on your top cap... now it gets dangerous. please be carefull and do this outside, as butane is highly flamable. put the tube/pipe in a vise/clamp. with the 5 holes facing down and the pyrex dish under it. DO THIS STEP AWAY FROM HEAT AND OR FLAME. spray all of the butane into the top hole "should take a minute". now you should see some crazy golden liquid comeing out the bottom. let drain for 20 min. then let the stuff in the pyrex glass fizz for at least another 20-40min. putting a warm thing of water underit will make it speed up. now after the butane is done evaporating you should have this goo that is a golden brown. scrape up and put in a vial. wha la honey oil. put a bit on a fresh packed bowl, hot knife it, or make jelly hash by mixing 1 part oil to 2 parts hash. makes a putty like substance. HAVE FUN AND BE SAFE. i am not responsible for any harm done by dumbasses or anyone else that fucks up.

enjoy. and add too it if ive messed up as im pretty well blazed.

*Ripcord* · 10-09-2007, 05:08 PM

What diameter pipe are we talking here? 1"? Pre-threaded galvenized? And what do you mean by "warm thing" of water? And how far away?

snwbrdr · 10-09-2007, 05:11 PM

how much trim do you use with 2 8 oz cans? when I make that stuff I use WAAY more butane for a 1.5' pipe that i use, 2 cans just doesnt seem to get it all......

here is a GREAT thread with details and pictures on how to make that yummy yummy butane honey oil......

funny story some guy at the store asked me why i needed so much butane and i told him jokingly that i smoke alot of cigarettes....and then he said well theres this other fella who comes in every two weeks and buys 9 cans he must smoke alot too

snwbrdr · 10-09-2007, 05:13 PM

oh and I use PVC pipe for mine and it works fine and i have tons of it lying around from all my hydro crap......and its easier to work with and your hand wont freeze to it

toke'a'bowl · 10-09-2007, 05:14 PM

see i knew i need your help... any diamiter you want.... if you use 4 cans you get more product.... and it dont mater how far away just so it aint splashig or in it, and a dish of warm water under the other dish.

toke'a'bowl · 10-09-2007, 05:16 PM

only thing is butane can strip the plastic a bit so it will contaminate more. if you want a little plastic its cool but i say just use metal and a cloth around your had works.

snwbrdr · 10-09-2007, 05:23 PM

Quote:

let drain for 20 min. then let the stuff in the pyrex glass fizz for at least another 20-40min. putting a warm thing of water underit will make it speed up.

Quote:

And what do you mean by "warm thing" of water? And how far away?

butane is very very cold as a liquid and has a very low boiling point. thus making it great to use as a solvent because we can boil it off at room tempratures, and dont have to add a flame(most solvents are flamable)

so when you put it in a pyrex dish in a liquid form it will tend to freeze the dish and cover it in frost.

so what you can do to help boil off the butane faster is to stick the dish in a warm water bath to heat up the pyrex above freezing to room temp and boil off the butane faster, however this can cause the butane to boil very rapidly and "spit" all over causing you to lose some of the final product.

I usually stick the dish in COLD water to keep it from freezing but not really speed up the evaporation any, then once all of the liquid butane appears to be gone i then set the dish in VERY VERY hot water(if the dish is super cold be careful you can crack it changing temps super quick, with pyrex its less likely though) to ensure all of the butane is evaporated and gone.

the stuff rocks, i would recomend just leaving it all in the dish, and just scrape off what you need for the time being, then just cover it with plastic and stick in the cupboard.

mmmm now i want to go make soem

snwbrdr · 10-09-2007, 05:25 PM

really butane will eat away the PVC? didnt know that.......i cant tell that it does if that counts for anything

snwbrdr · 10-09-2007, 05:33 PM

heres another guide to making BHO from another great site out there

Quote:

From the site above: Erowid Note: Some concern has been expressed about the possibility of a PVC residue in the final product. This has not been verified, but a possible solution would be to use steel instead. Some reliable chemists have stated that PVC should be resistant to butane, but a preliminary flush of the PVC to remove any residue left from production might be warranted.]

not sure what a "reliable chemist" warrants as.....but like i said i have never tasted anything bad

snwbrdr · 10-09-2007, 05:44 PM

anyone know what PVC type 1 is? is that what you can get at HD? if so it appears that PVC type 1 is excellent for butane, not corrosive.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best way to store Honey Oil Hash?	snwbrdr	Hash, Hash Oil, and Kiff	20	06-04-2007 05:36 PM
So you wanna make Honey Oil??? - Tutorial	stickeyfinger	Hash, Hash Oil, and Kiff	61	02-10-2006 07:29 AM
So you wanna make Honey Oil??? - Tutorial	stickeyfinger	Recycling	50	07-21-2004 07:43 PM
Hash oil & Honey oil	youngsta	Hash, Hash Oil, and Kiff	2	05-10-2004 11:57 AM
Need Hash/Honey oil help!	youngsta	Hash, Hash Oil, and Kiff	1	05-07-2004 06:05 PM

New To Site?	Need Help?
Register to Participate View Forum Leaders Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

Hot Products: