| | #3 | |||
| Seedling Join Date: Oct 2002 Location: Las Vegas
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
![]() | Quote:
glass jar with a cap (12-24 oz) strainer or some window screen seiv coffee filters ,grinder Get an ounce of good marijuana buds. Dry them ,not in the oven ,over night on a paper,boul or something and crush them up with a pair of scissors, a grinder, or something similar. Strain the powder through a strainer or some window screen(seiv) to remove any stems, seeds, or other non leaf material. Add the powder to a 12-24 oz, or larger tall clear glass jar with a cap, do not fill the jar with more than 1/4 mj powder. Add very cold, or ice water till the jar is nearly (7/8 ths) full. DO NOT USE WARM OR HOT WATER USE COLD ICE WATER ONLY Put the cap securely on the water - mj mixture and shake for as long as it takes to get the powder mixed into the water, this is harder than it sounds because mj is not water soluble. If you have access to a paint mixer, put the mix on for 5 minutes or longer. If you are doing it by hand, make sure there are no clumps of plant matter then stop shaking the mix. Wait for 45 minutes or longer, open the jar and remove the plant matter floating on the top. Put the material you remove in another jar and repeat the process to try to get the remaining resin. Wait for 20 minutes or more, keeping the jar as still as possible, then carefully pour off the water to within 1 inch of the material at the bottom of the jar. The bottom of the jar material is the hashish. Fill the jar with the hashish material with cold water as before, and let the mixture settle for a minimum of 15 minutes. Then carefully pour off the water to within 1 inch of the material at the bottom of the jar. Pour the hash material through a coffee filter. Make sure you get it all, it is potent. After the water has drained through the coffee filter, use a spoon to push the resin to an edge of the coffee filter, then roll the hash up in the filter, and gently squeeze out more water. After that wrap some paper towels around the filter and drain more moisture. Scrape the resin out of the filter and you have hashish. If you want to smoke the hash in a pipe you will have to press the resin into a solid mass by using your hands. If not, the hash will turn to a liquid when heated, and flow past your pipe screen. eighter rap it in aliminium foil and punch it with a hammer or a very heavy weight on it during the night,or a simple vice to press. quick and simple.... ![]()
__________________ Know thyself | |||
| | |
| | #4 | ||
| Herbalist ![]() Join Date: Feb 2003 Location: A small dot on the map of all things.
Posts: 1,049
Thanks: 26
Thanked 77 Times in 37 Posts
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Very good ladyhawk, very good indeed.
__________________ "Back in the day it was called sexual harrassment, now I call it an assault with a dead weapon" _Quest4High The Grow Guide Agent 86, a great bubbler bucket thread! Buckethead thread...tooo funny. | ||
| | |
| | #5 | ||
| Fiat Voluntas Dei ![]() Join Date: Jul 2003 Location: In the Awesome Light
Posts: 1,360
Thanks: 914
Thanked 579 Times in 310 Posts
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | I make hash in about 10 minutes that almost sends me to the outerlimits of my body so here it is:Tools required: Weed Coffee Grinder Fine Meshed Tea-Ball Saranwrap Small brush (paintbrush prefered) Take some great bud or whatever you are using and put into a coffee grinder. Give it a couple of rev's (not to many than you get green matter). Get a small (MESHED) tea-ball, place your ground herb into the ball. Lay out a good sized square of saranwrap on a flat surface. Take the teaball and shake it until your goodies come out (nice fine light light light brownish colored powder comes out), I prefer to add small amounts at atime to get max powder. Then once that is done take the brush and sweep out the powder from inside the grinder cap and body area onto the saranwrap. Carefully sweep all the powder into a pile and bring the saranwrap up to pile and form it into a ball. Tighten the ball up and play with it in the saranwrap until it is a solid mass (takes no time at all). Take it out and play with it. If it is dry don't worry (add a small and I mean small drop of water to your fingers and roll it around there and then you have killer hash (usually it does not need any water due to the great sticky powder). Wow it took me longer to type this then to make it but trust me, my brother in law and myself almost go into withdrawl when we dont smoke this daily. Oh yeah YOU CAN STILL SMOKE THE WEED killer stuff this hash. | ||
| | |
| | #7 | ||
| Senior Gardener Join Date: Mar 2004 Location: Peeking through the leaves of my personal jungle
Posts: 727
Thanks: 0
Thanked 31 Times in 6 Posts
![]() ![]() ![]() ![]() | a tea ball is a spherical strainer about the diameter of a silver dollar. You put fresh tea leaves in it rather than using bags. It has a little handle and you dunk it in your hot water. They're nifty for tea, and apparently for hash too ![]() Note - your trim or bud or whatever should be super dry and/or preferably frozen when you do this, or you could be looking at a big project to clean resin out of your coffee grinder... ~cb
__________________ "I am kind of paranoid in reverse. I suspect people of plotting to make me happy." - J. D. Salinger ![]() My Grow v1.0 Journal Skunk #1 & DP Blueberry in soil. My Grower's Dictionary v1.2 Updated 3/14/04... Check it out and comment for the benefit of all. Also visit the Cultivation Risk Report. Maybe it will put your mind at ease (or maybe not!) More advanced grower? Check out the CO2 Enrichment Guide. | ||
| | |
| | #8 | ||
| Pot Snob ![]() ![]() Join Date: Aug 2002 Location: Altered State
Posts: 2,513
Thanks: 49
Thanked 80 Times in 51 Posts
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
A 1 lb. coffee can, with bottom removed. Place a piece of pantyhose over one end, and secure with a rubberband or ziptie. Don't stretch too tight, or leaf matter will fall through. Insert handful of trim leaf, lightly ground, replace plastic lid, and SHAKE. After hand pressing. ![]() | ||
| | |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
| New To Site? | Need Help? |